Partners

PARTNERSHIPS

We have acquired partners globally
who help us to stay abreast with
growths in technology and hence
deliver a better service to our clients.

Our worldwide partnerships allow us to
expand our product portfolio enabling us to
provide a more complete line of products and
services. ALAFCO has struck strategic long
term partnerships with Gripple and Advanced Polymer Coatings.

ALAFCO is the exclusive distributor of the
Gripple Hanging systems in Saudi Arabia.
The use of Gripple aptly demonstrates the
importance we place on innovation to
provide a better service to our clients.

Benefits of using the Gripple hanging system:
  • Unique hanging system from the UK. It is being used in 95 countries.
  • Upto 6 times faster than using traditional method of threaded rods
  • Lower labour requirement.
  • Eliminates the need to measure, cut at site and is a hassle free process
  • Gripple is approximately 90% lighter than threaded rod, reducing the load on the building structure considerably. Also makes handling easier.
  • Low overall cost due to a reduction in installation time and labour cost.

We have integrated planning and
estimation, manufacturing, delivering,
installation, support services, so
seamlessly that the entire process is one.

Forming a joint venture with Advanced
Polymer Coatings from USA, ALAFCO has
developed a niche in the field of chemical
resistant polymer coated ductwork (fume
exhaust system) for use in Medical
laboratories, semiconductor industry and
where there is risk of chemical attack and
abrasive wear.

During the KSU project, the client faced the
difficulty of sourcing a local manufacturer/applicator
who could not only supply the ductwork, coated
with APC’s Chemline 784/32 resin, but also take
responsibility for installation and repairs. ALAFCO
rose up to the challenge and ensured the
chemical coated duct work was manufactured,
applied, cured and installed perfectly.

This partnership with APC highlights ALAFCO’s
dedication to use innovative technologies and the
willingness to go out of their comfort zone to
provide effective solutions and great customer
service to our clients.

Alafco is partnered with IMI Acoustics for the KSA region, enabling us to offer a range of services over the whole spectrum of acoustics, architectural acoustic design, sound insulation testing, noise monitoring as well as industrial noise and vibration control. Our other services which include site inspections, noise mapping, expert witness services and product development.

We offer a rigorously quality-controlled products & services, using cutting-edge softwares, to ensure that :

  • Where there could be a noise or vibration problem, we provide strategies on how to prevent it.
  • Where there is a noise or vibration management problem, we give guidance on how to put it right.
  • If there is a requirement for good internal acoustics, we will produce the design to achieve the highest acoustic quality.
  • Where there is a need of industrial or traffic noise mapping, we supply the clearest and most reliable data using the best software in the field.
  • As part of our installation & testing we undertake Noise Survey and Acoustic Mapping services using both the ECHOSOFT - Noise Analysis Pro 1.1 and VIBRASOFT - Vibration Analysis Pro 1.1 This software is developed and maintained by IMI Acoustics, based on ISO, ASHRAE, ASTM, CIBSE, ASHRAE, BS CoP and other International Standards.

Alafco is the exclusive manufacturing license holder of Fenland Fire Contracts Ltd for the KSA region, enabling us to manufacture, install and inspect a full range of Fire Rated ductwork alongside out HVAC services . The Fenland Fire Duct System complies with the requirements of Method 3 of BS 5588 part 9: 1989, and has been fully tested in accordance with BS 476 part 24: 1987 (ISO 6944: 1985) the independent NAMAS-accredited Building Research Establishment. Complete details are fully documented in the Building Research Establishment Report.

The Fenland Fire Duct System has been assessed by the BRE Centre for Fire Resistance (formerly the Loss Prevention Council) as being suitable for use as:

“a Fire Rated Ventilation Duct, a Smoke Extract/Outlet Duct or a Kitchen Extract Duct.” Alafcos engineers are FIRAS certified (an independent accreditation and training scheme run by Warrington Fire research) which enables us to inspect and certify fire-rated ductwork, from manufacturing to installation.

FIRAS provides you with the assurance that the Fire Duct installation has been carried out by knowledgeable and competent operators and supervisors ensuring each step is carried out according to standards audited by BRE Warrington Exova and that the system will perform as anticipated. Our partnership allows us to provide a complete Fire rated ductwork solution, removing the need for our clients to go to a separate contractor. This highlights our commitment to provide a complete range of HVAC services to our esteemed clients.

Partners
Partnerships
We have acquired partners globally
who help us to stay abreast with
growths in technology and hence
deliver a better service to our clients.
Our worldwide partnerships allow
us to expand our product portfolio
enabling us to provide a more
complete line of products and
services. ALAFCO has struck
strategic long term partnerships with
Gripple and Advanced Polymer Coatings.
ALAFCO is the exclusive distributor
of the Gripple Hanging systems in
Saudi Arabia. The use of Gripple
aptly demonstrates the importance
we place on innovation to provide
a better service to our clients.
Benefits of using the Gripple hanging system:
  • Unique hanging system from the UK. It is being used in 95 countries.
  • Upto 6 times faster than using traditional method of threaded rods
  • Lower labour requirement.
  • Eliminates the need to measure, cut at site and is a hassle free process.
  • Gripple is approximately 90% lighter than threaded rod, reducing the load on the building structure considerably. Also makes handling easier.
WE HAVE INTEGRATED
PLANNING AND ESTIMATION,
MANUFACTURING, DELIVERING, INSTALLATION, SUPPORT
SERVICES, SO SEAMLESSLY
THAT THE ENTIRE PROCESS
IS ONE.
Forming a joint venture with Advanced Polymer Coatings from USA, ALAFCO has developed a niche in the field of chemical resistant polymer coated ductwork (fume exhaust system) for use in Medical laboratories, semiconductor industry and where there is risk of chemical attack and abrasive wear.
During the KSU project, the client faced the difficulty of sourcing a local manufacturer/applicator who could not only supply the ductwork, coated with APC’s Chemline 784/32 resin, but also take responsibility for installation and repairs. ALAFCO rose up to the challenge and ensured the chemical coated duct work was manufactured, applied, cured and installed perfectly.
This partnership with APC highlights ALAFCO’s dedication to use innovative technologies and the willingness to go out of their comfort zone to provide effective solutions and great customer service to our clients.
Alafco is partnered with IMI Acoustics for the KSA region, enabling us to offer a range of services over the whole spectrum of acoustics, architectural acoustic design, sound insulation testing, noise monitoring as well as industrial noise and vibration control. Our other services which include site inspections, noise mapping, expert witness services and product development.
We offer a rigorously quality-controlled products & services, using cutting-edge softwares, to ensure that :
  • Where there could be a noise or vibration problem, we provide strategies on how to prevent it.
  • Where there is a noise or vibration management problem, we give guidance on how to put it right.
  • If there is a requirement for good internal acoustics, we will produce the design to achieve the highest acoustic quality
  • Where there is a need of industrial or traffic noise mapping, we supply the clearest and most reliable data using the best software in the field.
  • - Vibration Analysis Pro 1.1 This software is developed and maintained by IMI Acoustics, based on ISO, ASHRAE, ASTM, CIBSE, ASHRAE, BS CoP and other International Standards.
Alafco is the exclusive manufacturing license holder of Fenland Fire Contracts Ltd for the KSA region, enabling us to manufacture, install and inspect a full range of Fire Rated ductwork alongside out HVAC services . The Fenland Fire Duct System complies with the requirements of Method 3 of BS 5588 part 9: 1989, and has been fully tested in accordance with BS 476 part 24: 1987 (ISO 6944: 1985) the independent NAMAS-accredited Building Research Establishment. Complete details are fully documented in the Building Research Establishment Report.
The Fenland Fire Duct System has been assessed by the BRE Centre for Fire Resistance (formerly the Loss Prevention Council) as being suitable for use as:
“a Fire Rated Ventilation Duct, a Smoke Extract/Outlet Duct or a Kitchen Extract Duct.” Alafcos engineers are FIRAS certified (an independent accreditation and training scheme run by Warrington Fire research) which enables us to inspect and certify fire-rated ductwork, from manufacturing to installation.
FIRAS provides you with the assurance that the Fire Duct installation has been carried out by knowledgeable and competent operators and supervisors ensuring each step is carried out according to standards audited by BRE Warrington Exova and that the system will perform as anticipated. Our partnership allows us to provide a complete Fire rated ductwork solution, removing the need for our clients to go to a separate contractor. This highlights our commitment to provide a complete range of HVAC services to our esteemed clients.

We comply with the following standards